Please use this identifier to cite or link to this item: http://hdl.handle.net/11458/2433
Title: Diseño de concreto de alta resistencia f'c=900 kg/𝑪𝒎𝟐 , usando agregados del río Huallaga para la ciudad de Tarapoto, provincia de San Martín, región de San Martín
Authors: Celis Angulo, Wilton
Heredia Mendoza, Edinson Alexander
Keywords: Concreto de alta resistencia
Diseño de mezclas
Dosificación
Resistencia a la compresión
Issue Date: 2017
Publisher: Universidad Nacional de San Martín. Fondo Editorial
Source: Heredia-Mendoza, E. A. (2017). Diseño de concreto de alta resistencia f'c=900 kg/𝑪𝒎𝟐 , usando agregados del río Huallaga para la ciudad de Tarapoto, provincia de San Martín, región de San Martín. Tesis para optar el grado de Ingeniero Civil. Facultad de Ingeniería Civil y Arquitectura, Universidad Nacional de San Martín, Tarapoto, Perú.
Abstract: La presente investigación científica estudia el diseño del concreto de alta resistencia de 𝑓´𝑐 ≥900 Kg/𝑐𝑚2 , usando insumos locales como los agregados (cantera Buenos Aires - Provincia de Picota), el cemento Portland tipo I (planta de cemento Pacasmayo - Prov. de Rioja) e insumos nacionales como la microsílice (SIKA FUME) y el superplastificante (SIKA VISCOCRETE 20HE); desarrollada con el objetivo de demostrar que usando insumos locales se pueden producir este tipo de concreto; permitiendo así, presentar una nueva alternativa en materiales para la industria de la construcción regional. Esta investigación inició con la determinación y obtención de las propiedades físicas y químicas de los insumos predispuestos a usar; luego, se procedió a desarrollar diseños de mezclas; se inició creando un Concreto Patrón (C°P), con relación Agua/Cemento (A/C) igual a 0.40; a partir de ésta, se experimenta un nuevo diseño, usando el aditivo reductor de agua de alto rango (superplastificante) en una dosis del 1.5% del peso del cemento (Wc), logrando reducir la relación A/C a 0.25, mezcla que se la denominó como Concreto más Aditivo Superplastificante (C°AS). Finalmente, se procedió a trabajar la mezcla C°AS más la adición del microsílice, obteniendo así una dosis de superplastificante del 1.4% del Wc para una dosis de microsílice del 9.5% del Wc, mezcla denominada como Concreto más aditivo Superplastificante y Microsílice (MS 9.5), concreto con el cual se obtuvieron resultados óptimos y alentadores. Las mezclas trabajadas con relación A/C igual a 0.25, obtuvieron asentamientos del orden de 7 a 9 pulg. y una extensibilidad entre 40 y 55 cm, considerándolos como concretos de altas resistencias y semi-autocompactantes. Los diseños usan como base el método de diseño de mezclas propuesto por el comité ACI 211.4R e investigaciones realizadas a nivel nacional e internacional; Todas trabajadas y monitoreadas bajo las Normas Técnicas Peruanas. La más alta resistencia a la compresión promedio obtenida fue de 1222 Kg/𝐶��𝑚��2 a la edad de 56 días, resultado obtenido con el diseño MS 9.5; superando las expectativas iniciales y demostrando que si es posible estar a la altura de las nuevas tecnologías del concreto usando insumos locales.
The present scientific research studies the design of high strength concrete 𝑓'𝑐 ≥900 Kg / 𝑐𝑚2 , using local inputs such as aggregates (quarry Buenos Aires - Province of Picota), Portland cement type I (cement plant Pacasmayo - Prov. of Rioja) and national inputs such as microsilice (SIKA FUME) and superplasticizer (SIKA VISCOCRETE 20HE); developed with the aim of demonstrating that using local inputs can produce this type of concrete; allowing to present a new alternative in materials for the regional construction industry. This research began with the determination and the obtaining of the physical and chemical characteristics of the inputs predisposed to use; Then, we proceeded to increase designs of mixtures; was started by creating a Concrete Pattern (C ° P), with relation Water / Cement (A / C) equal to 0.40; from here, a new design is experimented, using the additive (superplasticizer) at a rate of 1.5% of the cement (Wc), reducing the A / C ratio to 0.25, a mixture that was denominated as Concrete plus Superplasticizer Additive (C ° AS). Finally, working the C ° AS mixture plus the addition of the microsilice, thus obtaining a dose of superplasticizer of 1.4% of Wc for a dose of microsilice of 9.5% of Wc, mixture called Concrete plus Superplasticizer and Microsilice additive (MS 9.5), concrete with which optimum and encouraging results were obtained. The mixtures worked with A / C ratio of 0.25, obtained settlements of order from 7 to 9 in. and an extensibility between 40 and 55 cm, considering them as concrete of high resistance and semi-self-compacting. The designs use as a base the mix design method proposed by the ACI 211.4R Committee and investigations performs a national and international level; All worked and monitored under the Peruvian Technical Standards. The highest average compressive strength obtained was 1222 Kg / 𝐶�𝑚�2 at the age of 56 days, result obtained with the design MS 9.5; surpassing initial expectations and demonstrating that it is possible to be in the height of new concrete technologies using local inputs.
URI: http://hdl.handle.net/11458/2433
Appears in Collections:(Br.) Ingeniería Civil

Files in This Item:
File Description SizeFormat 
T034_70396959_T.pdf5.19 MBAdobe PDFThumbnail
View/Open
Show full item record

Google ScholarTM

Check


This item is licensed under a Creative Commons License Creative Commons