Please use this identifier to cite or link to this item: http://hdl.handle.net/11458/357
Title: Diseño hidráulico y estructural de la bocatoma del proyecto de irrigación avisado – valle La Conquista
Authors: Pizarro Baldera, Jose del Carmen
Cunia Perez, Luis Ernesto
Keywords: Diseño hidráulico
Proyecto
Issue Date: 2005
Publisher: Universidad Nacional de San Martín. Fondo Editorial
Source: Cunia-Perez, L. E. (2005). Diseño hidráulico y estructural de la bocatoma del proyecto de irrigación avisado – valle La Conquista. Tesis para optar el grado de Ingeniero Civil. Facultad de Ingeniería Civil y Arquitectura, Universidad Nacional de San Martín, Tarapoto, Perú.
Abstract: The following Engineering thesis is framed within the degree program according to the modality of formulation and the support of the thesis, which will lead to the author to obtain the professional title of civil engineer. For these aims it has been chosen to develop a subject of the area of titled hydraulics "Hydraulic and Structural Design of the Bocatoma of the Project of lrrigation "AvisadoValley La Conquista", which objective has been to study in depth the aspects of hydraulic design and structural of bocatoma over the river Avisado, in the valley la Conquista. The data considered in the analysis has been taken from Proyecto Especial Alto Mayo (PEAM), which brings up the use of the resources of the Avisado river, located in the smaller populated center Conquista, province of Moyobamba, region San Martín. Within this project it has been considered to irrigate approximately 2.200has; according to the feasibility study, made by the PEAM (1997). In this project an alternative of pickup in the Avisado river is considered to cover this demand. The development of the thesis appears through six chapters, as it follows: Chapter 1: The introduction to the thesis is indicated. lt indicates the location and position of project's zone, also the objectives and records to define the accomplishments of the thesis. Chapter 11: The analysis of the basic information available is made: geologic topography of the land, hydrological conditions, geological, etc. Chapter 111: The theoretical frame referring to the pick up of the structures appear, necessary information for the design of bocatomas, types of bocatomas, and the main parts of one bocatoma. Chapter IV: The hydraulic design of bocatoma appears, the design includes/understands the sizing of the derived dam, the pick up, the sysmtem of cleaning and walls of channeling. Chapter V: The structural design of bocatoma appears, the design includes/understands the reinforcing of the barrage, walls of channeling, slab of operation of the floodgate of cleaning and the pillar. Chapter VI: One indicates the conclusions and recommendations of the developed chapters.
La presente Tesis de Ingeniería esta enmarcada dentro del programa de titulación según la modalidad de formulación y sustentación de tesis, que conducirá a la obtención del título profesional de ingeniero civil del autor. Para estos fines se ha elegido desarrollar un tema del área de hidráulica titulada "Diseño Hidráulico y Estructural de la Bocatoma del Proyecto de Riego "Avisado- Valle la Conquista", cuyo objetivo ha sido profundizar en los aspectos de diseño hidráulico y estructural de la bocatoma sobre el rió Avisado, en el valle la Conquista. Los datos considerados en el análisis se han tomado del Proyecto Especial Alto Mayo (PEAM), el cual plantea la utilización de los recursos del río Avisado, ubicado en centro poblado menor la Conquista, provincia de Moyobamba, región San Martín. Dentro de este proyecto se está planteando irrigar aproximadamente 2,200 Has según el estudio de prefactibilidad, realizado por el PEAM (1997). En este proyecto se plantea una alternativa de captación en el río Avisado para cubrir dicha demanda. El desarrollo de la tesis se presenta a través de seis capítulos, como sigue: Capitulo 1.- Se indica la introducción a la tesis, señalando la localización y la ubicación de la zona del proyecto, asimismo los objetivos y antecedentes· para definir los alcances de la tesis. Capitulo 11.- Se realiza el análisis de la información básica disponible: topografía del terreno, condiciones hidrológicas, geológicas, etc. Capitulo 111.- Se presenta el marco teórico referente a las estructuras de captación, información necesaria para el diseño de bocatomas, tipos de bocatomas, partes principales de una bocatoma. Capitulo IV.- Se presenta el diseño hidráulico de la bocatoma, el diseño comprende el dimensionamiento de la presa derivadora, la captación, el sistema de limpia y de los muros de encauzamiento. Capitulo V.- Se presenta el diseño estructural de la bocatoma, el diseño comprende el reforzamiento del barraje, muros de encauzamiento, losa de operación de la compuerta de limpia y del pilar. Capítulo VI.- Se indica las conclusiones y recomendaciones de los capítulos desarrollados.
URI: http://hdl.handle.net/11458/357
Appears in Collections:(Br.) Ingeniería Civil

Files in This Item:
File Description SizeFormat 
TCIV_69.pdf7.47 MBAdobe PDFThumbnail
View/Open
Show full item record

Google ScholarTM

Check


This item is licensed under a Creative Commons License Creative Commons