Please use this identifier to cite or link to this item: http://hdl.handle.net/11458/3890
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorMartinez Quiroz, Enrique Napoleon
dc.contributor.authorSanchez Garcia, Rina
dc.contributor.authorChong Pinedo, Eduardo Francisco
dc.date.accessioned2021-03-17T15:48:29Z
dc.date.available2021-03-17T15:48:29Z
dc.date.issued2019
dc.identifier.citationSanchez-Garcia, R. & Chong-Pinedo, E. F. (2019). Diseño de concreto 175 Kg/cm2, 210 Kg/cm2 y 280, Kg/cm2, con agregado grueso del río Huallaga y agregado fino del río Sisa. Tesis para optar el grado de Ingeniero Civil. Facultad de Ingeniería Civil y Arquitectura, Universidad Nacional de San Martín, Tarapoto, Perú.es_PE
dc.identifier.urihttp://hdl.handle.net/11458/3890
dc.description.abstractEl presente trabajo de investigación tuvo como objetivo principal realizar el diseño de concreto 175 Kg/cm2, 210 Kg/cm2 y 280, Kg/cm2, con materiales de diferentes canteras, mediante la combinación de agregados de dos ríos, para finalmente obtener un diseño de mezcla óptimo de acuerdo a las características de los elementos. Se inició con el análisis de las propiedades físicas y químicas de las muestras tomadas en las canteras y la elaboración de probetas de concreto en el orden de; agregado fino del rio Sisa, agregado grueso rio Huallaga. Seguidamente se procedió con su rotura a los 7 días, 14 días y 28 días respectivamente con la finalidad de obtener un resultado ideal y por consiguiente más adecuado según la cantidad de agregado que se utilice de cada cantera y la resistencia a la compresión obtenida. Al finalizar los ensayos, la dosis óptima en el incremento de la relación A/C es de 1.25% de la relación patrón que se obtuvo del Método ACI. El método ACI para el diseño de los Mezclas de concreto nos permitió mediante sus criterios estimar las cantidades aproximadas de los materiales para la elaboración de los especímenes requeridos en la obtención de los diseños de concreto de 175 kg/cm2, 210 kg/cm2 y 280 kg/cm2.es_PE
dc.description.abstractThe main objective of this research work was to design concrete 175 Kg/cm2, 210 Kg/cm2 and 280, Kg/cm2, with materials from different quarries, by combining aggregates from two rivers, to finally obtain a design Optimum mixing according to the characteristics of the elements. It began with the analysis of the physical and chemical properties of the samples taken in the quarries and the elaboration of concrete specimens in the order of; fine aggregate from the Sisa river, coarse aggregate from the Huallaga river. It was then broken at 7 days, 14 days and 28 days respectively in order to obtain an ideal result and therefore more appropriate according to the amount of aggregate used from each quarry and the compressive strength obtained. At the end of the tests, the optimum dose in the increase of the A / C ratio is 1.25% of the standard ratio obtained from the ACI Method. The ACI method for the design of concrete mixtures allowed us through its criteria to estimate the approximate quantities of materials for the elaboration of the specimens required in obtaining the concrete designs of 175 kg/cm2, 210 kg/cm2 and 280 kg/cm2.es_PE
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Nacional de San Martín. Fondo Editoriales_PE
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/deed.eses_PE
dc.sourceRepositorio - UNSMes_PE
dc.subjectAgregadoes_PE
dc.subjectGruesoes_PE
dc.subjectFinoes_PE
dc.subjectConcretoes_PE
dc.subjectDiseñoes_PE
dc.subjectMezclases_PE
dc.subjectResistenciaes_PE
dc.subjectCompresiónes_PE
dc.titleDiseño de concreto 175 Kg/cm2, 210 Kg/cm2 y 280, Kg/cm2, con agregado grueso del río Huallaga y agregado fino del río Sisaes_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.grantorUniversidad Nacional de San Martín. Facultad de Ingeniería Civil y Arquitecturaes_PE
thesis.degree.nameIngeniero Civiles_PE
dc.type.versioninfo:eu-repo/semantics/publishedVersiones_PE
dc.publisher.countryPEes_PE
renati.author.dni70155956es_PE
renati.author.dni46726202es_PE
renati.advisor.orcidhttps://orcid.org/0000-0002-5965-9892es_PE
renati.advisor.dni00953065es_PE
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttps://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
renati.discipline732267es_PE
renati.jurorRioja Diaz, Jorge Isaacses_PE
renati.jurorHuaman Torrejon, Carlos Segundoes_PE
renati.jurorReategui Acedo, Ivan Gustavoes_PE
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.languageiso639-1es-
item.openairetypeinfo:eu-repo/semantics/bachelorThesis-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:(Br.) Ingeniería Civil
Files in This Item:
File Description SizeFormat 
CIVIL - Rina Sánchez García & Eduardo Francisco Chong Pinedo.pdfAgregado, grueso, fino, concreto, diseño, mezclas, resistencia, compresión.4.45 MBAdobe PDFThumbnail
View/Open
Show simple item record

Google ScholarTM

Check


This item is licensed under a Creative Commons License Creative Commons