Please use this identifier to cite or link to this item: http://hdl.handle.net/11458/4506
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorReategui Acedo, Ivan Gustavoes_PE
dc.contributor.authorRodrigo Arce, Efraimes_PE
dc.contributor.authorDiaz Tapullima, Jhordy Cristianes_PE
dc.date.accessioned2022-10-18T18:15:09Z-
dc.date.available2022-10-18T18:15:09Z-
dc.date.issued2022-
dc.identifier.citationRodrigo Arce, E. & Diaz Tapullima, J.C.(2022). Rediseño del sistema de agua potable de la localidad de Churuzapa, para solucionar el abastecimiento de la localidad .Tesis para optar el grado de Ingeniero Civil. Facultad de Ingeniería Civil, Universidad Nacional de San Martín, Tarapoto, Perú.es_PE
dc.identifier.urihttp://hdl.handle.net/11458/4506-
dc.description.abstractEl Informe final de la tesis denominado “Rediseño del Sistema de Agua Potable de la localidad de Churuzapa, para solucionar el abastecimiento de la localidad”, se desarrolló en la Facultad de Ingeniería Civil y Arquitectura, escuela profesional de Ingeniería Civil de la Universidad Nacional de San Martin – Tarapoto. Esta tesis se presenta para que la Localidad de Churuzapa tenga un sistema apropiado de agua potable es por eso que hemos realizado el Rediseño del sistema de agua potable, para mejorar la salud y el bienestar de los pobladores, es por ello consideremos los estudios básicos como topografía y otros dado que en la actualidad el abastecimiento es ineficiente, el proyecto de investigación se rige a solucionar y disminuir los problemas realizando un diagnóstico real y cuantitativo de la localidad en lo que concierne a la calidad y demanda del agua de consumo humano, se elaboró un diseño hidráulico del servicio de agua para abastecer la demanda requerida, adicionalmente un tratamiento y un adecuado control regular basado en resultados obtenidos del análisis físico-químico, bacteriológico del recurso hídrico, así también como su aprovechamiento en el punto de captación. El diseño hidráulico del servicio de agua está basado en conocimientos de cálculos en hidráulica, adquiridos en las aulas de la casa de estudio superior; como también estudios topográficos para la superficie del sistema y la mecánica de fluidos que establecen el parámetro fijo e importante que es la población total beneficiaria. Con tal dato se determinó el caudal de diseño, requerido para satisfacer el consumo de los pobladores. Se realizó una simulación del sistema con el programa WaterCAD V8i, donde se verifica el funcionamiento y la obtención de los resultados más óptimos y satisfactorios. Este proyecto de investigación se generó a consecuencias de la necesidad de mejorar el abastecimiento de agua para el consumo, aumentar la oferta y abastecer la demanda, como también incrementar la red del servicio básico de agua potable en el centro poblado de Churuzapa, distrito de Rumizapa - San Martín, siendo este servicio uno de los más fundamentales e importante para la subsistencia de los pobladores ya que en la localidad existen 243 viviendas con un total de 509 habitantes. A ello se suma la existencia de 02 instituciones educativas, 01 capilla y 01 Posta Médica quienes serán beneficiados con dicho proyecto.es_PE
dc.description.abstractThe final report of the thesis entitled “Redesign of the Drinking Water System of the town of Churuzapa, to solve the supply of the town”, was performed at the Faculty of Civil Engineering and Architecture, professional school of Civil Engineering of the National University of San Martin - Tarapoto. This thesis is presented in order that the village of Churuzapa has a proper drinking water system, for this reason the redesign of the drinking water system has been carried out, to improve the health and welfare of the villagers. Therefore, the basic studies such as topography and others should be considered, given that at present the water supply is inefficient. The research project is aimed at solving and reducing the problems by carrying out a real and quantitative diagnosis of the locality with regard to the quality and demand of water for human consumption. A hydraulic design of the water service was developed to supply the required demand, in addition to a treatment and an adequate regular control based on the results obtained from the physical-chemical and bacteriological analysis of the water resource, as well as its use at the catchment point. The hydraulic design of the water service is based on knowledge of hydraulic calculations, acquired in the classrooms of the university, as well as topographic studies for the surface of the system and fluid mechanics that establish the fixed and important parameter, which is the total of the beneficiary population. With this data, the design flow required to satisfy the consumption of the inhabitants was determined. A simulation of the system was carried out with the WaterCAD V8i program, where the operation was verified and the most optimal and satisfactory results were obtained. This research project was generated as a result of the need to improve the water supply for consumption, increase the supply and supply demand, as well as increase the network of basic drinking water service in the village of Churuzapa, district of Rumizapa - San Martin. This service is one of the most fundamental and important for the subsistence of the inhabitants, since the villgae has 243 houses with a total of 509 inhabitants. In addition, there are 02 educational institutions, 01 chapel and 01 medical center that will benefit from this project.es_PE
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Nacional de San Martín. Fondo Editoriales_PE
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/deed.eses_PE
dc.sourceRepositorio - UNSMes_PE
dc.subjectRediseño Hidráulicoes_PE
dc.subjectAbastecimiento de aguaes_PE
dc.subjectSistema de agua potablees_PE
dc.subjectPotabilizaciónes_PE
dc.titleRediseño del sistema de agua potable de la localidad de Churuzapa, para solucionar el abastecimiento de la localidades_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.disciplineIngeniería Civiles_PE
thesis.degree.grantorUniversidad Nacional de San Martín. Facultad de Ingeniería Civil y Arquitecturaes_PE
thesis.degree.nameIngeniero Civiles_PE
dc.type.versioninfo:eu-repo/semantics/publishedVersiones_PE
dc.publisher.countryPEes_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.01.01es_PE
renati.author.dni74252115-
renati.author.dni73466656-
renati.advisor.orcidhttps://orcid.org/0000-0002-4681-171Xes_PE
renati.advisor.dni1130970-
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE
renati.levelhttps://purl.org/pe-repo/renati/nivel#tituloProfesionales_PE
renati.discipline732016es_PE
renati.jurorRioja Diaz, Jorge Isaacses_PE
renati.jurorHuaman Torrejon, Carlos Segundoes_PE
renati.jurorSandoval salazar, Nestor Raules_PE
item.cerifentitytypePublications-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.languageiso639-1es-
item.openairetypeinfo:eu-repo/semantics/bachelorThesis-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:(Br.) Ingeniería Civil
Files in This Item:
File Description SizeFormat 
Ing. Civil - Efraim Rodrigo Arce & Jhordy Cristian Diaz Tapullima.pdfRediseño Hidráulico, Abastecimiento de agua, Sistema de agua potable, Potabilización5.34 MBAdobe PDFThumbnail
View/Open
Show simple item record

Google ScholarTM

Check


This item is licensed under a Creative Commons License Creative Commons